Coal-based honeycomb charcoal

Honeycomb activated carbon can be widely used in various gas purification equipment and waste gas treatment projects. Practice has proved that the purification effect is better than ordinary ones. The pollutants that can be removed to varying degrees by honeycomb activated carbon include: nitrogen oxide, carbon tetrachloride, chlorine, benzene, diformaldehyde, acetone, ethanol, ether, methanol, acetic acid, ethyl ester, styrene, phosgene, odorous gases and other acidic and alkaline gases.

Honeycomb activated carbon has the characteristics of large specific surface area, small through-hole resistance, developed micropores, high adsorption capacity, and long service life. It is widely used in air pollution control. The honeycomb activated carbon adsorption method is selected, that is, the exhaust gas contacts with porous activated carbon with a large surface, and the pollutants in the exhaust gas are adsorbed, thereby playing a purification role.

It can be used directly or placed in a purification cabinet or adsorption bed. If the exhaust gas concentration is high and the emission is large, two purification cabinets and adsorption beds can be used in rotation. During use, try to avoid excessive temperature, which will reduce the adsorption capacity, and the adsorption capacity will decrease with the increase of temperature; at the same time, avoid high dust content and oil mist, because tar dust mist will block the micropores of activated carbon, increase resistance, and reduce the adsorption effect. If the use environment contains a lot of dense dust and tar, a pre-stage dust removal filter should be installed to achieve the best use effect and the longest service life.

After water-resistant treatment and secondary firing, honeycomb activated carbon has the characteristics of high strength, water resistance, strong acid and strong alkali resistance. It can be widely used in wastewater treatment, organic solvent recovery and adsorption, and as a carrier for various catalysts.

The packaging method can be selected and customized: 30 pieces/box

[Common acceptance standards for activated carbon]

Wooden activated carbon is in accordance with GB/T13803.2-2015, GB/T12496-1999, and coal-based activated carbon is in accordance with GB/T7702-2008.

Or the standard can refer to ASTM standard for activated carbon & AWWA standard for activated carbon, etc.